Materials and Manufacturing

Article (refereed)

• Ahmadkhaniha, D., Sieber, M., Zanella, C. (2024). Controlling coating thickness distribution for a complex geometry with the help of simulation. The International Journal of Advanced Manufacturing Technology (pp. 3703-3717).
• Ahmadkhaniha, D., Zanella, C., Belov, I., Matsushita, T. (2024). Study of the process parameters influence on crack formation in laser alloying of grey cast iron. Optics and Laser Technology
• Belov, I., Fourlakidis, V., Domeij, B., Matsushita, T., Diószegi, A. (2024). A thermal conductivity model for lamellar and compacted graphite irons. International Journal of metalcasting
• Belov, I., Fourlakidis, V., Domeij, B., Matsushita, T., Diószegi, A. (2024). A thermal conductivity model for grey iron. International Journal of metalcasting 18(3), 2107-2117
• Bogdanoff, T., Ghassemali, E., Jarfors, A., Seifeddine, S. (2024). The impact of HIP process and heat treatment on the mechanical behaviour of an Al–Si–Mg alloy component. International Journal of metalcasting
• Bogdanoff, T., Tiryakioglu, M., Jarfors, A., Ghassemali, E. (2024). A simple procedure to assess the Complete Melt Quality in aluminium castings: implementation in a die-casting and a rheo-casting. International Journal of Cast Metals Research 37(1), 71-79
• Bruschi, S., Bertolini, R., Ghiotti, A., Mahmood, H., Zanella, C. (2024). Machinability of recycled aluminum alloys. Manufacturing Letters (pp. 1669-1675).
• Burman, E., Hansbo, P., Larson, M. (2024). CUT FINITE ELEMENT METHOD FOR DIVERGENCE-FREE APPROXIMATION OF INCOMPRESSIBLE FLOW: A LAGRANGE MULTIPLIER APPROACH. SIAM Journal on Numerical Analysis 62(2), 893-918
• Burman, E., Hansbo, P., Larson, M. (2024). Low regularity estimates for CutFEM approximations of an elliptic problem with mixed boundary conditions. Mathematics of Computation 93(345), 35-54
• Domeij, B., Diószegi, A. (2024). Relationships between macrostructure and microstructure in lamellar graphite iron castings. International Journal of metalcasting
• Domeij, B., Diószegi, A. (2024). A review of dendritic austenite in cast irons. Springer
• Frachon, T., Hansbo, P., Nilsson, E., Zahedi, S. (2024). A DIVERGENCE PRESERVING CUT FINITE ELEMENT METHOD FOR DARCY FLOW. SIAM Journal on Scientific Computing 46(3), A1793-A1820
• Krawiec, H., Kozina, I., Starowicz, M., Lekka, M., Zanella, C., Fedrizzi, L. ... Deflorian, F. (2024). Corrosion Rate and Mechanism of Degradation of Chitosan/TiO₂ Coatings Deposited on MgZnCa Alloy in Hank's Solution. International Journal of Molecular Sciences 25(10),
• Lattanzi, L., Awe, S. (2024). Thermophysical properties of Al-based metal matrix composites suitable for automotive brake discs. Journal of Alloys and Metallurgical Systems
• Lattanzi, L., Jarfors, A., Awe, S. (2024). On the possibility of using secondary alloys in the production of aluminum-based metal matrix composite. Crystals 14(4),
• Li, Z., Jarfors, A., Jansson, P. (2024). Sustainable choices of alloying element for aluminium for thermal conductivity in circular manufacturing. Sustainable Materials and Technologies
• Li, Z., Tan, H., Jarfors, A., Jansson, P., Lattanzi, L. (2024). Smart-Cast: An AI-Based System for Semisolid Casting Process Control. Procedia Computer Science (pp. 2440-2447).
• Li, Z., Tan, H., Jarfors, A., Steggo, J., Lattanzi, L., Jansson, P. (2024). On the potential of using ensemble learning algorithm to approach the partitioning coefficient (k) value in Scheil–Gulliver equation. Materials Genome Engineering Advances
• Linder, C., Mehta, B., Sainis, S., Lindén, J., Zanella, C., Nyborg, L. (2024). Corrosion resistance of additively manufactured aluminium alloys for marine applications. npj Materials Degradation 8(1),
• Matsushita, T., Belov, I., Svidró, J., Svidró, J., Diószegi, A. (2024). Analysis of the penetration behavior of molten cast iron into the sand mold. International Journal of metalcasting (pp. 2254-2267).
• Matsushita, T., Domeij, B., Fourlakidis, V., Belov, I., Diószegi, A. (2024). A model for the effect of microstructure on the ultimate tensile strength of cast irons. International Journal of metalcasting
• Matsushita, T., Ekengård, J., Diószegi, A. (2024). Thermodynamic discussion on the influence of the magnesium addition and temperature on the oxygen potential in the cast irons. Steel Research International
• Matsushita, T., Sundaram, D., Belov, I., Diószegi, A. (2024). Kinetic model for the decomposition rate of the binder in a foundry sand application. Archives of Foundry Engineering
• Mohammadi Zahrani, M., Ranjbarnodeh, E., Ketabchi, M., Ghassemali, E. (2024). Microstructure evolution and mechanical properties of laser-welded joints of 1.2 GPa-class quenching and partitioning steel. Optics and Laser Technology
• Olofsson, J., Bogdanoff, T., Tiryakioğlu, M. (2024). On revealing hidden entrainment damage during in situ tensile testing of cast aluminum alloy components. Materials Characterization
• Ousiabou, B., Ooi, S., Javaheri, V., Ghassemali, E. (2024). On accelerated design, and characterization of a hydrogen-embrittlement tolerant Mn-Steel. Engineering Failure Analysis
• Palmqvist, U., Leisner, P., Ahlberg, E. (2024). Electrochemistry of Molybdenum Single Crystals and Thin Wires in Cyanide and Gold Cyanide Electrolytes. Journal of the Electrochemical Society 171(4),
• Queirós, R., Domeij, B., Diószegi, A. (2024). Unraveling compacted and nodular cast iron porosity: Case studies approach. International Journal of metalcasting (pp. 1811-1830).
• Rolseth, A., Carlsson, M., Ghassemali, E., Pérez Caro, L., Jarfors, A. (2024). Impact of functional integration and electrification on aluminium scrap in the automotive sector: A review. Resources, Conservation and Recycling
• State, S., Costovici, S., Mousavi, M., Garcia, Y., Zanella, C., Cojocaru, A. ... Enachescu, M. (2024). Electrodeposited Sn-Cu-Ni alloys as lead-free solders on copper substrate using deep eutectic solvents: The influence of electrodeposition mode on the morphology, composition and corrosion behaviour. Surface & Coatings Technology
• Sundaram, D., Matsushita, T., Belov, I., Diószegi, A. (2024). Evaluation of permeability models for foundry molds and cores in sand casting processes. Archives of Foundry Engineering 24(1), 94-106
• Sundaram, D., Svidró, J., Diószegi, A. (2024). Thermal analysis and gas generation measurement of foundry sand mixtures. International Journal of metalcasting
• Yang, S., Wang, K., Jarfors, A., Sun, Z., Li, Q., Wang, Z., Huang, Z. (2024). Electron Backscatter Diffraction Investigation on Microstructure Evolution of TiB2(p)/Al-Cu Composite after Single-Pass Equal Channel Angular Pressing for Formability Assessment. Journal of materials engineering and performance (Print)
• Zhang, Q., Liljenfors, T., Jonsson, S., Jarfors, A. (2024). On the application of reduced pressure test for the prediction of ductility of 46000 alloy: Role of pore's morphology and distribution. Journal of Materials Research and Technology (pp. 927-934).
• Belov, I., Matsushita, T., Johansson, A., Jarfors, A. (2023). Simulation and Experimental Methodology for Virtual Prototyping of Annealed Industrial Coils. Heat Transfer Engineering 44(4), 353-367
• Bogdanoff, T., Börjesson, J., Seifeddine, S., Tiryakioğlu, M., Ghassemali, E. (2023). On the secondary cracks during crack propagation in an Al-Si-Cu-Mg alloy: An in-situ study. Materials Characterization
• Bogdanoff, T., Tiryakioglu, M., Liljenfors, T., Jarfors, A., Seifeddine, S., Ghassemali, E. (2023). On the Effectiveness of Rotary Degassing of Recycled Al-Si Alloy Melts: The Effect on Melt Quality and Energy Consumption for Melt Preparation. Sustainability 15(6),
• Bogdanoff, T., Tiryakioğlu, M., Jarfors, A., Seifeddine, S., Ghassemali, E. (2023). On the combined effects of surface quality and pore size on the fatigue life of Al–7Si–3Cu–Mg alloy castings. Materials Science & Engineering
• Burman, E., Hansbo, P., Larson, M., Larsson, K. (2023). Extension operators for trimmed spline spaces. Computer Methods in Applied Mechanics and Engineering
• Burman, E., Hansbo, P., Larson, M. (2023). The Augmented Lagrangian Method as a Framework for Stabilised Methods in Computational Mechanics. Archives of Computational Methods in Engineering (pp. 2579-2604).
• Burman, E., Hansbo, P., Larson, M., Larsson, K. (2023). Isogeometric analysis and Augmented Lagrangian Galerkin Least Squares Methods for residual minimization in dual norm. Computer Methods in Applied Mechanics and Engineering 417(Part B),
• Di Egidio, G., Martini, C., Börjesson, J., Ghassemali, E., Ceschini, L., Morri, A. (2023). Dry sliding behavior of AlSi10Mg alloy produced by Laser-based Powder Bed Fusion: influence of heat treatment and microstructure. Wear
• Di Egidio, G., Martini, C., Börjesson, J., Ghassemali, E., Ceschini, L., Morri, A. (2023). Influence of Microstructure on Fracture Mechanisms of the Heat-Treated AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion. Materials 16(5),
• Domeij, B., Belov, I., Fourlakidis, V., Diószegi, A. (2023). Implementation and Validation of Casting Simulation Methodology for Diagnostics of Lamellar Graphite Iron. International Journal of metalcasting (pp. 1507-1517).
• Domeij, B., Elfsberg, J., Diószegi, A. (2023). Evolution of Dendritic Austenite in Parallel With Eutectic in Compacted Graphite Iron Under Three Cooling Conditions. Metallurgical and materials transactions. B, process metallurgy and materials processing science (pp. 2395-2410).
• Du, A., Lattanzi, L., Jarfors, A., Zheng, J., Wang, K., Yu, G. (2023). Role of matrix alloy, reinforcement size and fraction in the sliding wear behaviour of Al-SiCp MMCs against brake pad material. Wear
• Du, A., Lattanzi, L., Jarfors, A., Zheng, J., Wang, K., Yu, G. (2023). On the efficient particle dispersion and transfer in the fabrication of SiC-particle-reinforced aluminum matrix composite. Crystals 13(12),
• Fourlakidis, V., Hernando, J., Diószegi, A. (2023). Primary Austenite Morphology and Tensile Strength in CGI for Different C Contents, Cooling Conditions and Nodularity. International Journal of metalcasting
• Fourlakidis, V., Hernando, J., Holmgren, D., Diószegi, A. (2023). Relationship Between Thermal Conductivity and Tensile Strength in Cast Irons. International Journal of metalcasting (pp. 2862-2867).
• Jarfors, A. (2023). On the Generation of Excess Solid Fraction in the RheoMetal Process. Metals 13(10),
• Jones, C., Jarfors, A., Rogers, E., Vrethed, P., Silva, P., Jolly, M. (2023). A mathematical examination of the impact of mould transparency to infrared radiation on solidification during the investment casting process. IOP Conference Series 1281(1),
• Kassapidou, M., Stenport, V., Johansson, C., Syverud, M., Hammarström Johansson, P., Börjesson, J., Hjalmarsson, L. (2023). Cobalt-chromium alloys in fixed prosthodontics: Investigations of mechanical properties and microstructure. The Journal of prosthetic dentistry (Print) 130(2), 255.e1-255.e10
• Matsushita, T., Zamani, M., Kump, A., Jarfors, A. (2023). Evaluation of the Critical Times for the Crack Susceptibility Coefficient Calculation. International Journal of metalcasting
• Mölmen, L., Fast, L., Lundblad, A., Eriksson, P., Leisner, P. (2023). Contact resistance measurement methods for PEM fuel cell bipolar plates and power terminals. Journal of Power Sources
• Olofsson, J. (2023). Integrated fatigue life predictions of aluminium castings using simulated local microstructure and defects. IOP Conference Series 1281(1),
• Olofsson, J., Bogdanoff, T., Tiryakioğlu, M. (2023). Revealing and simulating the effect of hidden damage on local and full-field deformation behaviour of cast aluminium. IOP Conference Series 1281(1),
• Taguchi, S., Hasome, H., Shimizu, S., Ishiwata, R., Inoue, R., Yamada, M. ... Ito, T. (2023). Proposal of Temperature Correction of Molten Oxide Based on Its Emissivity for Measurement of Temperature Dependence of Its Density Using ELF in ISS. INTERNATIONAL JOURNAL OF MICROGRAVITY SCIENCE AND APPLICATION 40(1),
• Tiryakioğlu, M., Jarfors, A., Leitner, M. (2023). The Impact of the Minimum Ductility Requirement in Automotive Castings on the Carbon Dioxide Footprint throughout the Useful Life of an Electric Car. Metals 13(3),
• Zaffarani, P., Zhang, Q., Jarfors, A., Timelli, G. (2023). Influence of stirring process during slurry formation on the casting defects and high-temperature fatigue of rheocast AlSi7Mg alloys. IOP Conference Series 1274(1),
• Zendejas Medina, L., Mølmen, L., Paschalidou, E., Donzel-Gargand, O., Leisner, P., Jansson, U., Nyholm, L. (2023). Extending the Passive Region of CrFeNi-Based High Entropy Alloys. Advanced Functional Materials 33(51),
• Zhang, Q., Jonsson, S., Jarfors, A. (2023). Four-point bending fatigue behavior of rheocast AlSi7Mg0.3 alloy: Role of the surface liquid segregation. International Journal of Fatigue
• Zhang, Q., Liljenfors, T., Jansson, S., Jonsson, S., Jarfors, A. (2023). Effect of Na-based flux on melt quality assessment of 46,000 alloys. Journal of Materials Research and Technology (pp. 1830-1842).
• Ahmadkhaniha, D., Kruemmling, J., Zanella, C. (2022). Electrodeposition of High Entropy Alloy of Ni-Co-Cu-Mo-W from an Aqueous Bath. Journal of the Electrochemical Society 169(8),
• Akhavan Attar, A., Alavi Nia, A., Mazaheri, Y., Ghassemali, E. (2022). High Strength-Elongation Balance in Warm Accumulative Roll Bonded AA1050 Sheets. Metals and Materials International (pp. 346-360).
• Ashrafi, H., Shamanian, M., Emadi, R., Aghili, S., Ghassemali, E. (2022). Damage Micromechanisms in Friction Stir-Welded DP600 Steel during Uniaxial Tensile Deformation. Journal of materials engineering and performance (Print) (pp. 10044-10053).
• Atefi, S., Parsa, M., Ahmadkhaniha, D., Zanella, C., Jafarian, H. (2022). A study on microstructure development and mechanical properties of pure copper subjected to severe plastic deformation by the ECAP-Conform process. Journal of Materials Research and Technology (pp. 1614-1629).
• Burman, E., Hansbo, P., Larson, M. (2022). Error Estimates for the Smagorinsky Turbulence Model: Enhanced Stability Through Scale Separation and Numerical Stabilization. Journal of Mathematical Fluid Mechanics 24(1),
• Burman, E., Hansbo, P., Larson, M. (2022). CutFEM based on extended finite element spaces. Numerische Mathematik (pp. 331-369).
• Burman, E., Hansbo, P., Larson, M. (2022). Explicit time stepping for the wave equation using CutFEM with discrete extension. SIAM Journal on Scientific Computing 44(3), A1254-A1289
• Conway, P., Golay, D., Bassman, L., Ferry, M., Laws, K. (2022). Thermodynamic modelling to predict phase stability in BCC + B2 Al–Ti–Co–Ni–Fe–Cr high entropy alloys. Materials Chemistry and Physics
• Conway, P., Klaver, T., Steggo, J., Ghassemali, E. (2022). High entropy alloys towards industrial applications: High-throughput screening and experimental investigation. Materials Science & Engineering
• Du, A., Lattanzi, L., Jarfors, A., Zhou, J., Zheng, J., Wang, K., Yu, G. (2022). The Influence of Ce, La, and SiC Particles Addition on the Formability of an Al-Si-Cu-Mg-Fe SiCp-MMC. Materials 15(11),
• Eiler, K., Mölmen, L., Fast, L., Leisner, P., Sort, J., Pellicer, E. (2022). Oxygen reduction reaction and proton exchange membrane fuel cell performance of pulse electrodeposited Pt–Ni and Pt–Ni–Mo(O) nanoparticles. Materials Today Energy
• Fourlakidis, V., Belov, I., Diószeg, A. (2022). Experimental model of the pearlite interlamellar spacing in lamellar graphite iron. Tecnologia em Metalurgia, Materiais e Mineração
• Ghassemali, E., Conway, P. (2022). High-Throughput CALPHAD: A Powerful Tool Towards Accelerated Metallurgy. Frontiers Media S.A.
• Ghatei-Kalashami, A., Ghassemali, E., DiGiovanni, C., Goodwin, F., Zhou, N. (2022). Liquid metal embrittlement cracking behavior in iron-zinc (Fe/Zn) couple: Comparison of ferritic and austenitic microstructures. Materials letters (General ed.)
• Hansbo, P., Larson, M. (2022). Nitsche's finite element method for model coupling in elasticity. Computer Methods in Applied Mechanics and Engineering
• Hansbo, P., Larson, M. (2022). A simple nonconforming tetrahedral element for the Stokes equations. Computer Methods in Applied Mechanics and Engineering
• Hansbo, P., Larson, M. (2022). Augmented Lagrangian approach to deriving discontinuous Galerkin methods for nonlinear elasticity problems. International Journal for Numerical Methods in Engineering 123(18), 4407-4421
• Jandaghi, M., Pouraliakbar, H., Fallah, V., Ghassemali, E., Saboori, A., Pavese, M. (2022). Additive manufacturing of nano-oxide decorated AlSi10Mg composites: A comparative study on Gd2O3 and Er2O3 additions. Materials Characterization
• Jarfors, A., Du, A., Zhou, J., Zheng, J., Yu, G. (2022). On the In-Die Conditions and Process Parameter Settings in Indirect Squeeze Casting. Technologies 10(1),
• Jarfors, A., Jafari, M., Aqeel, M., Liljeqvist, P., Jansson, P. (2022). In-Production Rheometry of Semi-Solid Metal Slurries. Metals 12(7),
• Jarfors, A., Jansson, P. (2022). Selecting Cast Alloy Alloying Elements Suitable for a Circular Society. Sustainability 14(11),
• Jarfors, A., Zhang, Q., Jonsson, S. (2022). An a Priori Discussion of the Fill Front Stability in Semisolid Casting. Technologies 10(3),
• Kim, B., Dahle, A., Park, Y., Lee, Y. (2022). The effect of Sr additions on Al–Cu–Si ternary eutectic alloys for a high-ductility bimodal microstructure. Materials Science & Engineering
• Lattanzi, L., Etienne, A., Li, Z., Chandrashekar, G., Gonapati, S., Awe, S., Jarfors, A. (2022). The effect of Ni and Zr additions on hardness, elastic modulus and wear performance of Al-SiCp composite. Tribology International
• Lattanzi, L., Etienne, A., Li, Z., Manjunath, T., Nixon, N., Jarfors, A., Awe, S. (2022). The influence of Ni and Zr additions on the hot compression properties of Al-SiCp composites. Journal of Alloys and Compounds
• Lattanzi, L., Merlin, M., Fortini, A., Morri, A., Garagnani, G. (2022). Effect of Thermal Exposure Simulating Vapor Deposition on the Impact Behavior of Additively Manufactured AlSi10Mg Alloy. Journal of materials engineering and performance (Print) (pp. 2859-2869).
• Matsushita, T., Belov, I., Johansson, A., Jarfors, A. (2022). Influence of contact pressure on the thermal contact conductance of layered metallic sheets. High Temperatures-High Pressures 51(1), 63-82
• Pinate, S., Ghassemali, E., Zanella, C. (2022). Strengthening mechanisms and wear behavior of electrodeposited Ni–SiC nanocomposite coatings. Journal of Materials Science 57(35), 16632-16648
• Sainis, S., Zanella, C. (2022). A localized study on the influence of surface preparation on the reactivity of cast Al-7Si-1Fe and Al-7Si-2Cu-1Fe alloys and their effect on cerium conversion coating deposition. Applied Surface Science
• Santos, J., Jarfors, A., Dahle, A. (2022). Tag-and-Trace Method of α-Al Crystals Applied to Study Solidification and Casting of Aluminum Alloys. Metallurgical and Materials Transactions. A (pp. 3311-3320).
• Santos, J., Zhu, B., Zanella, C., Jarfors, A. (2022). Fatigue Crack Initiation on Semi-Solid Al–7Si–Mg Castings. Metals 12(7),
• Soper, A., Shaw, A., Conway, P., Pomrehn, G., Ferry, M., Bassman, L. ... Laws, K. (2022). Assessing Mg–Sc–(rare earth) ternary phase stability via constituent binary cluster expansions. Computational materials science
• Sundaram, D., Svidró, J., Svidró, J., Diószegi, A. (2022). A Novel Approach to Quantifying the Effect of the Density of Sand Cores on Their Gas Permeability. Journal of Casting & Materials Engineering 6(2), 33-38
• Ahmadkhaniha, D., Lattanzi, L., Bonora, F., Fortini, A., Merlin, M., Zanella, C. (2021). The effect of co-deposition of sic sub-micron particles and heat treatment on wear behaviour of ni–p coatings. Coatings 11(2), 1-16
• Ahmadkhaniha, D., Moller, H., Zanella, C. (2021). Studying the Microstructural Effect of Selective Laser Melting and Electropolishing on the Performance of Maraging Steel. Journal of materials engineering and performance (Print) 30(9), 6588-6605
• Ahmadkhaniha, D., Tsongas, K., Tzetzis, D., Zanella, C. (2021). Study of the effect of pulse plating parameters on the electrodeposition of NiP and NiP/SiC coatings and their microhardness values. Transactions of the Institute of Metal Finishing 99(1), 29-37
• Akhavan Attar, A., Alavi Nia, A., Mazaheri, Y., Ghassemali, E. (2021). Improving the fracture toughness of multi-layered commercial pure aluminum via warm accumulative roll bonding. The International Journal of Advanced Manufacturing Technology (pp. 3603-3617).
• Bogdanoff, T., Lattanzi, L., Merlin, M., Ghassemali, E., Jarfors, A., Seifeddine, S. (2021). The complex interaction between microstructural features and crack evolution during cyclic testing in heat-treated Al–Si–Mg–Cu cast alloys. Materials Science & Engineering
• Dini, H., Andersson, N., Jarfors, A. (2021). Effect of Process Parameters on Distortion and Residual Stress in High-Pressure Die Cast AZ91D Components After Clean Blasting and Painting. International Journal of metalcasting 15(1), 241-258
• Du, A., Jarfors, A., Zheng, J., Wang, K., Yu, G. (2021). The influence of la and ce on microstructure and mechanical properties of an al-si-cu-mg-fe alloy at high temperature. Metals 11(3),
• Du, A., Lattanzi, L., Jarfors, A., Zheng, J., Wang, K., Yu, G. (2021). On the hardness and elastic modulus of phases in SiC-reinforced Al composite: Role of La and Ce addition. Materials 14(21),
• Fedel, M., Zanella, C., Ferrari, L., Deflorian, F. (2021). Effect of the synthesis parameters of in situ grown Mg-Al LDHs on the filiform corrosion susceptibility of painted AA5005. Electrochimica Acta
• Fourlakidis, V., Schmidt, P., Jarfors, A., Svidró, P., Diószegi, A. (2021). Fatigue limit and microstructure in lamellar graphite iron. Materials Science & Engineering
• Ghatei-Kalashami, A., Ghassemali, E., DiGiovanni, C., Goodwin, F., Zhou, N. (2021). Occurrence of liquid-metal-embrittlement in a fully ferritic microstructure. Materialia
• Hwang, E., Cuddy, E., Lin, J., Kaufman, J., Shaw, A., Conway, P. ... Bassman, L. (2021). Predicting ductility in quaternary B2-like alloys. Physical Review Materials 5(3),
• Jansson, J., Salomonsson, K., Olofsson, J. (2021). Image-based semi-multiscale finite element analysis using elastic subdomain homogenization. Meccanica (Milano. Print) (pp. 2799-2811).
• Jarfors, A., Ghasemi, R., Awe, S., Jammula, C. (2021). Comparison between high-pressure die-cast and rheo-cast aluminium-SICp MMC; wear and friction behaviour. La Metallurgia Italiana (pp. 13-18).
• Jarfors, A., Matsushita, T., Siafakas, D., Stolt, R. (2021). On the nature of the anisotropy of Maraging steel (1.2709) in additive manufacturing through powder bed laser-based fusion processing. Materials & design
• Jarfors, A., Sevastopol, R., Seshendra, K., Zhang, Q., Steggo, J., Stolt, R. (2021). On the Use of Conformal Cooling in High-Pressure Die-Casting and Semisolid Casting. Technologies 9(2),
• Jarfors, A., Shashidhar, A., Yepur, H., Steggo, J., Andersson, N., Stolt, R. (2021). Build strategy and impact strength of slm produced maraging steel (1.2709). Metals 11(1), 1-20
• Jarfors, A., Zhou, J., Du, A., Zheng, J., Yu, G. (2021). On the Part Quality, Process Parameters and In-Die Pressures in Indirect Squeeze Casting. Technologies 9(4),
• Khorshidi, H., Kermanpur, A., Rastegari, H., Ghassemali, E., Somani, M. (2021). Design of a hot deformation processing map for a Ni-free, N-bearing austenitic stainless steel. Materials Today Communications
• Leisner, P., Larson, C., Nielsen, L., Mueller, S., Hansal, W., Puippe, J., Zielonka, A. (2021). Global competitiveness of European surface technology. Part 2: challenges to and future development of the surface finishing sector. Transactions of the Institute of Metal Finishing 99(1), 4-9
• Liu, Z., Sun, J., Yan, Z., Lin, Y., Liu, M., Roven, H., Dahle, A. (2021). Enhanced ductility and strength in a cast Al–Mg alloy with high Mg content. Materials Science & Engineering
• Matsushita, T., Belov, I., Siafakas, D., Jarfors, A., Watanabe, M. (2021). Interfacial phenomena between molten iron and molten slag–Effect of nitrogen on the Marangoni convection. Journal of Materials Science (pp. 7811-7822).
• Mølmen, L., Eiler, K., Fast, L., Leisner, P., Pellicer, E. (2021). Recent advances in catalyst materials for proton exchange membrane fuel cells. APL Materials 9(4),
• Pinate, S., Eriksson, F., Leisner, P., Zanella, C. (2021). Effects of SiC particles codeposition and ultrasound agitation on the electrocrystallisation of nickel-based composite coatings. Journal of Materials Science (pp. 18463-18476).
• Pinate, S., Ispas, A., Leisner, P., Zanella, C. (2021). Electrocodeposition of Ni composites and surface treatment of SiC nano-particles. Surface & Coatings Technology
• Pinate, S., Leisner, P., Zanella, C. (2021). Wear resistance and self-lubrication of electrodeposited Ni-SiC:MoS₂ mixed particles composite coatings. Surface & Coatings Technology
• Pinate, S., Nefzi, N., Zanella, C. (2021). Role of anodic time in pulse-reverse electrocodeposition of nano-SiC particles. Journal of the Electrochemical Society 168(6),
• Rivalta, F., Ceschini, L., Jarfors, A., Stolt, R. (2021). Effect of scanning strategy in the l‐pbf process of 18ni300 maraging steel. Metals 11(5),
• Sainis, S., Zanella, C. (2021). A study of the localized ceria coating deposition on Fe-rich intermetallics in an AlSiFe cast alloy. Materials 14(11),
• Santos, J., Jarfors, A., Dahle, A. (2021). Formation of coarse silicon near the surface of Al-7Si-Mg semi-solid castings. Metallurgical and Materials Transactions. A (pp. 5140-5145).
• Sundaram, D., Svidró, J., Diószegi, A., Svidró, J. (2021). Measurement of Darcian Permeability of foundry sand mixtures. International Journal of Cast Metals Research 34(2), 97-103
• Sundaram, D., Svidró, J., Svidró, J., Diószegi, A. (2021). On the relation between the gas-permeability and the pore characteristics of furan sand. Materials 14(14),
• Tan, H., Tarasov, V., Jarfors, A., Seifeddine, S. (2021). A design of fuzzy inference systems to predict tensile properties of as-cast alloy. The International Journal of Advanced Manufacturing Technology 113(3-4), 1111-1123
• Zhang, Q., Jonsson, S., Jarfors, A. (2021). On the Role of Stirring on Microstructure and Ductility of Rheocast Al Alloys. JOM 73(12), 3848-3857
• Zhu, B., Zanella, C. (2021). Influence of Fe-rich intermetallics and their segregation on anodising properties of Al-Si-Mg rheocast alloys. Surface & Coatings Technology
• Ahmadkhaniha, D., Eriksson, F., Zanella, C. (2020). Optimizing heat treatment for electroplated nip and NiP/SiC coatings. Coatings 10(12), 1-19
• Ashrafi, H., Shamanian, M., Emadi, R., Ghassemali, E. (2020). Void formation and plastic deformation mechanism of a cold-rolled dual-phase steel during tension. Acta Metallurgica Sinica (English Letters) (pp. 299-306).
• Bogdanoff, T., Lattanzi, L., Merlin, M., Ghassemali, E., Seifeddine, S. (2020). The influence of copper addition on crack initiation and propagation in an Al–Si–Mg alloy during cyclic testing. Materialia
• Burman, E., Hansbo, P., Larson, M., Massing, A. (2020). A stable cut finite element method for partial differential equations on surfaces: The Helmholtz–Beltrami operator. Computer Methods in Applied Mechanics and Engineering
• Burman, E., Christiansen, S., Hansbo, P. (2020). Application of a minimal compatible element to incompressible and nearly incompressible continuum mechanics. Computer Methods in Applied Mechanics and Engineering
• Burman, E., Hansbo, P., Larson, M. (2020). Dirichlet boundary value correction using Lagrange multipliers. BIT Numerical Mathematics (pp. 235-260).
• Burman, E., Hansbo, P., Larson, M. (2020). Cut Bogner-Fox-Schmit elements for plates. Advanced Modeling and Simulation in Engineering Sciences 7(1),
• Burman, E., Hansbo, P., Larson, M. (2020). A cut finite element method for a model of pressure in fractured media. Numerische Mathematik (pp. 783-818).
• Burman, E., Hansbo, P., Larson, M., Massing, A., Zahedi, S. (2020). A stabilized cut streamline diffusion finite element method for convection–diffusion problems on surfaces. Computer Methods in Applied Mechanics and Engineering
• Cenanovic, M., Hansbo, P., Larson, M. (2020). Finite element procedures for computing normals and mean curvature on triangulated surfaces and their use for mesh refinement. Computer Methods in Applied Mechanics and Engineering
• Ceschini, L., Messieri, S., Morri, A., Seifeddine, S., Toschi, S., Zamani, M. (2020). Effect of Cu addition on overaging behaviour, room and high temperature tensile and fatigue properties of A357 alloy. Transactions of Nonferrous Metals Society of China 30(11), 2861-2878
• Domeij, B., Diószegi, A. (2020). The Distribution of Carbon in Austenite Studied on a Water-Quenched Compacted Graphite Iron Using Electron Probe Microanalysis. International Journal of metalcasting (pp. 782-793).
• Eslami, M., Speranza, G., Deflorian, F., Zanella, C. (2020). Polypyrrole coatings on rheocast aluminum-silicon alloy: A correlation between properties and electrodeposition conditions. Surface and Interface Analysis 52(1-2), 4-15
• Hansbo, P., Larson, M., Larsson, K. (2020). Analysis of finite element methods for vector Laplacians on surfaces. IMA Journal of Numerical Analysis 40(3), 1652-1701
• Hellström, K., Diaconu, L., Diószegi, A. (2020). Density and thermal expansion coefficients of liquid and austenite phase in lamellar cast iron. China Foundry 17(2), 127-136
• Hernando, J., Elfsberg, J., Ghassemali, E., Dahle, A., Diószegi, A. (2020). The role of primary austenite morphology in hypoeutectic compacted graphite iron alloys. International Journal of metalcasting 14(3), 745-754
• Iqbal, M., Secchi, M., Iqbal, M., Montagna, M., Zanella, C., Fedel, M. (2020). MgAl-LDH/graphene protective film: Insight into LDH-graphene interaction. Surface & Coatings Technology
• Jansson, J., Olofsson, J., Salomonsson, K. (2020). Simulation-driven product development of cast components with allowance for process-induced material behaviour. Journal of Computational Design and Engineering 7(1), 78-85
• Jarfors, A. (2020). A comparison between semisolid casting methods for aluminium alloys. Metals 10(10), 1-15
• Jarfors, A., Du, A., Yu, G., Zheng, J., Wang, K. (2020). On the sustainable choice of alloying elements for strength of aluminum-based alloys. Sustainability 12(3),
• Jarfors, A., Zhang, Q., Jonsson, S. (2020). Feeding and pore formation in semisolid metal casting. Metals 10(11), 1-6
• Law, M., Hulme-Smith, C., Matsushita, T., Jönsson, P. (2020). Assessment of mechanisms for particle migration in semi-solid high pressure die cast aluminium-silicon alloys. Journal of Manufacturing and Materials Processing 4(2),
• Leisner, P., Larson, C., Nielsen, L., Müller, S., Hansal, W., Puippe, J., Zielonka, A. (2020). Global competitiveness of European surface technology: Part 1: competitiveness and the relationship between European manufacturing and surface finishing sectors. Transactions of the Institute of Metal Finishing 98(6), 279-287
• Mazaheri, Y., Jahanara, A., Sheikhi, M., Ghassemali, E. (2020). On the simultaneous improving of strength and elongation in dual phase steels via cold rolling. Metals 10(12), 1-16
• Pinate, S., Zanella, C. (2020). Wear behavior of Ni-based composite coatings with dual nano-SiC: Graphite powder mix. Coatings 10(11),
• Ramos, A., Diószegi, A., Guesser, W., Cabezas, C. (2020). Microstructure of compacted graphite iron near critical shrinkage areas in cylinder blocks. International Journal of metalcasting 14(3), 736-744
• Rosoiu, S., Pantazi, A., Petica, A., Cojocaru, A., Costovici, S., Zanella, C. ... Enachescu, M. (2020). Electrodeposition of NiSn-rGO composite coatings from deep eutectic solvents and their physicochemical characterization. Metals 10(11),
• Rosolymou, E., Spanou, S., Zanella, C., Tsoukleris, D., Köhler, S., Leisner, P., Pavlatou, E. (2020). Electrodeposition of photocatalytic sn-ni matrix composite coatings embedded with doped TiO2 particles. Coatings 10(8),
• Sainis, S., Roșoiu, S., Ghassemali, E., Zanella, C. (2020). The role of microstructure and cathodic intermetallics in localised deposition mechanism of conversion compounds on Al (Si, Fe, Cu) alloy. Surface & Coatings Technology
• Salomonsson, K., Svoboda, A., Andersson, N., Jarfors, A. (2020). Modeling and Analysis of a Screw Fitting Assembly Process Involving a Cast Magnesium Component. Frontiers in Materials
• Santos, J., Dahle, A., Jarfors, A. (2020). Magnesium solubility in primary α-al and heat treatment response of cast Al-7Si-Mg. Metals 10(5),
• Sola, R., Tonelli, L., Shashkov, P., Bogdanoff, T., Martini, C. (2020). Anodizing of AA6082-T5 by conventional and innovative treatments: Microstructural characterization and dry sliding behaviour. Wear
• Sreekanth, S., Ghassemali, E., Hurtig, K., Joshi, S., Andersson, J. (2020). Effect of direct energy deposition process parameters on single-track deposits of alloy 718. Metals 10(1),
• Svidró, J., Diószegi, A., Svidró, J. (2020). The origin of thermal expansion differences in various size fractions of silica sand. International Journal of Cast Metals Research 33(6), 242-249
• Tarasov, V., Tan, H., Jarfors, A., Seifeddine, S. (2020). Fuzzy logic-based modelling of yield strength of as-cast A356 alloy. Neural Computing & Applications 32(10), 5833-5844
• Uczak de Goes, W., Markocsan, N., Gupta, M., Vaßen, R., Matsushita, T., Illkova, K. (2020). Thermal barrier coatings with novel architectures for diesel engine applications. Surface & Coatings Technology
• Wollmann, D., Pintaude, G., Ghasemi, R. (2020). Effect of austempering treatment on lubricated sliding contact of compacted graphite iron. SN Applied Sciences 2(12),
• Xu, C., Andriollo, T., Zhang, Y., Hernando, J., Hattel, J., Tiedje, N. (2020). Micromechanical impact of solidification regions in ductile iron revealed via a 3D strain partitioning analysis method. Scripta Materialia (pp. 463-467).
• Zamani, M., Belov, I., Sjölander, E., Bjurenstedt, A., Ghassemali, E., Seifeddine, S. (2020). Study on dissolution of Al2Cu in al-4.3cu and a205 cast alloys. Metals 10(7), 1-17
• Zamani, M., Toschi, S., Morri, A., Ceschini, L., Seifeddine, S. (2020). Optimisation of heat treatment of Al–Cu–(Mg–Ag) cast alloys. Journal of thermal analysis and calorimetry (Print) (pp. 3427-3440).
• Ahmadkhaniha, D., Zanella, C. (2019). The effects of additives, particles load and current density on codeposition of SiC particles in NiP nanocomposite coatings. Coatings 9(9),
• Bjurenstedt, A., Ghassemali, E., Seifeddine, S., Dahle, A. (2019). The effect of Fe-rich intermetallics on crack initiation in cast aluminium: an in-situ tensile study. Materials Science & Engineering (pp. 502-507).
• Burman, E., Elfverson, D., Hansbo, P., Larson, M., Larsson, K. (2019). Cut topology optimization for linear elasticity with coupling to parametric nondesign domain regions. Computer Methods in Applied Mechanics and Engineering (pp. 462-479).
• Burman, E., Elfverson, D., Hansbo, P., Larson, M., Larsson, K. (2019). Hybridized CutFEM for Elliptic Interface Problems. SIAM Journal on Scientific Computing 41(5), A3354-A3380
• Burman, E., Hansbo, P., Larson, M. (2019). A simple finite element method for elliptic bulk problems with embedded surfaces. Computational Geosciences 23(1), 189-199
• Burman, E., Hansbo, P., Larson, M. (2019). Augmented Lagrangian finite element methods for contact problems. Mathematical Modelling and Numerical Analysis 53(1), 173-195
• Burman, E., Hansbo, P., Larson, M., Larsson, K. (2019). Cut finite elements for convection in fractured domains. Computers & Fluids (pp. 728-736).
• Burman, E., Hansbo, P., Larson, M., Larsson, K., Massing, A. (2019). Finite element approximation of the Laplace–Beltrami operator on a surface with boundary. Numerische Mathematik 141(1), 141-172
• Burman, E., Hansbo, P., Larson, M., Massing, A. (2019). Cut finite element methods for partial differential equations on embedded manifolds of arbitrary codimensions. Mathematical Modelling and Numerical Analysis 52(6), 2247-2282
• Burman, E., Hansbo, P., Larson, M., Samvin, D. (2019). A cut finite element method for elliptic bulk problems with embedded surfaces. GEM - International Journal on Geomathematics 10(1),
• Burman, E., Hansbo, P., Larson, M., Zahedi, S. (2019). Stabilized CutFEM for the convection problem on surfaces. Numerische Mathematik 141(1), 103-139
• Eslami, M., Deflorian, F., Zanella, C. (2019). Electrochemical performance of polypyrrole coatings electrodeposited on rheocast aluminum-silicon components. Progress in organic coatings
• Eslami, M., Deflorian, F., Zanella, C. (2019). Electrochemical Behavior of Conventional and Rheo-High-Pressure Die Cast Low Silicon Aluminum Alloys in NaCl Solutions. Corrosion 75(11), 1339-1353
• Eslami, M., Speranza, G., Fedel, M., Andersson, N., Deflorian, F., Omanovic, S., Zanella, C. (2019). Electropolymerization and possible corrosion protection effect of polypyrrole coatings on AA1050 (UNS A91050) in NaCl solutions. Corrosion 75(7), 745-755
• Ghasemi, R., Hassan, I., Ghorbani, A., Diószegi, A. (2019). Austempered compacted graphite iron — Influence of austempering temperature and time on microstructural and mechanical properties. Materials Science & Engineering
• Ghasemi, R., Johansson, J., Ståhl, J., Jarfors, A. (2019). Load effect on scratch micro-mechanisms of solution strengthened Compacted Graphite Irons. Tribology International (pp. 182-192).
• Ghassemali, E., Hernando, J., Stefanescu, D., Diószegi, A., Jarfors, A., Dluhoš, J., Petrenec, M. (2019). Revisiting the graphite nodule in ductile iron. Scripta Materialia (pp. 66-69).
• Gracco, A., Dandrea, M., Deflorian, F., Zanella, C., De Stefani, A., Bruno, G., Stellini, E. (2019). Application of a molybdenum and tungsten disulfide coating to improve tribological properties of orthodontic archwires. Nanomaterials 9(5),
• Hajiannia, I., Shamanian, M., Atapour, M., Ashiri, R., Ghassemali, E. (2019). The assessment of second pulse effects on the microstructure and fracture behavior of the resistance spot welding in advanced ultrahigh-strength steel TRIP1100. 16(2), 79-88
• Hernando, J., Elfsberg, J., Dahle, A., Diószegi, A. (2019). Evolution of primary austenite during coarsening and impact on eutectic microstructure in Fe–C–Si alloys. Materialia
• Hernando, J., Elfsberg, J., Ghassemali, E., Dahle, A., Diószegi, A. (2019). The effect of coarsening of primary austenite on the ultimate tensile strength of hypoeutectic compacted graphite Fe-C-Si alloys. Scripta Materialia (pp. 33-37).
• Leisner, P., Johansson, E. (2019). Aspects to be considered when making innovation out of promising research results in surface technology. Transactions of the Institute of Metal Finishing 97(2), 67-72
• Leisner, P., Nielsen, L. (2019). Offshoring and backshoring of surface finishing from the perspective of the Nordic countries. Transactions of the Institute of Metal Finishing 97(2), 54-56
• Mølmen, L., Alexandersson, A., Leisner, P. (2019). Surface technology should improve PEM fuel cell performance. Transactions of the Institute of Metal Finishing 97(3), 112-114
• Pinate, S., Leisner, P., Zanella, C. (2019). Electrocodeposition of nano-SiC particles by pulse-reverse under an adapted waveform. Journal of the Electrochemical Society 166(15), D804-D809
• Rasouli, D., Kermanpur, A., Ghassemali, E., Najafizadeh, A. (2019). On the reversion and recrystallization of austenite in the interstitially alloyed Ni-free nano/ultrafine grained austenitic stainless steels. Metals and Materials International 25(4), 846-859
• Rosoiu, S., Pantazi, A., Petica, A., Cojocaru, A., Costovici, S., Zanella, C. ... Enachescu, M. (2019). Comparative Study of Ni-Sn Alloys Electrodeposited from Choline Chloride-Based Ionic Liquids in Direct and Pulsed Current. Coatings 9(12),
• Santos, J., Jarfors, A., Dahle, A. (2019). Formation of Iron-Rich Intermetallic Phases in Al-7Si-Mg: Influence of Cooling Rate and Strontium Modification. Metallurgical and Materials Transactions. A 50(9), 4148-4165
• Seifiyan, H., Heydarzadeh Sohi, M., Ansari, M., Ahmadkhaniha, D., Saremi, M. (2019). Influence of friction stir processing conditions on corrosion behavior of AZ31B magnesium alloy. 7(4), 605-616
• Tan, H., Tarasov, V., Jarfors, A., Seifeddine, S. (2019). Fuzzy Logic Based Modelling of Cast Component Properties. IFAC-PapersOnLine 52(13), 1132-1137
• Tsongas, K., Tzetzis, D., Karantzalis, A., Banias, G., Exarchos, D., Ahmadkhaniha, D. ... Bochtis, D. (2019). Microstructural, Surface Topology and Nanomechanical Characterization of Electrodeposited Ni-P/SiC Nanocomposite Coatings. 9(14),
• Vahiddastjerdi, H., Rezaeian, A., Toroghinejad, M., Dini, G., Ghassemali, E. (2019). Optimizing pulsed Nd: YAG laser welding of high-Mn TWIP steel using response surface methodology technique. Optics and Laser Technology
• Zhang, Y., Nee, H., Hammam, T., Belov, I., Ranstad, P., Bakowski, M. (2019). Multiphysics Characterization of a Novel SiC Power Module. IEEE Transactions on Components, Packaging, and Manufacturing Technology 9(3), 489-501
• Zhu, B., Seifeddine, S., Jarfors, A., Leisner, P., Zanella, C. (2019). A study of anodising behaviour of Al-Si components produced by rheocasting. Solid State Phenomena (pp. 39-44).
• Zhu, B., Zanella, C. (2019). Hardness and corrosion behaviour of anodised Al-Si produced by rheocasting. Materials & design
• Ahmadkhaniha, D., Eriksson, F., Leisner, P., Zanella, C. (2018). Effect of SiC particle size and heat-treatment on microhardness and corrosion resistance of NiP electrodeposited coatings. Journal of Alloys and Compounds (pp. 1080-1087).
• Ahmadkhaniha, D., Huang, Y., Jaskari, M., Järvenpää, A., Sohi, M., Zanella, C. ... Langdon, T. (2018). Effect of high-pressure torsion on microstructure, mechanical properties and corrosion resistance of cast pure Mg. Journal of Materials Science 53(24), 16585-16597
• Aladov, V., Belov, I., Valyukhov, V., Zakgeim, A., Chernyakov, A. (2018). A study of thermal regime in the high-power LED arrays. St. Petersburg Polytechnical University Journal: Physics and Mathematics 11(3), 39-51
• Andriollo, T., Hellström, K., Sonne, M., Thorborg, J., Tiedje, N., Hattel, J. (2018). Uncovering the local inelastic interactions during manufacture of ductile cast iron: How the substructure of the graphite particles can induce residual stress concentrations in the matrix. Journal of the mechanics and physics of solids (pp. 333-357).
• Belov, V., Leisner, P., Mannikoff, A., Belov, I. (2018). Mathematical Model of Multi-Phase Power Converter for Parallel Computation. International Journal of Emerging Electric Power Systems 19(1),
• Bogdanoff, T., Dahle, A., Seifeddine, S. (2018). Effect of Co and Ni Addition on the Microstructure and Mechanical Properties at Room and Elevated Temperature of an Al–7%Si Alloy. International Journal of metalcasting 12(3), 434-440
• Burman, E., Elfverson, D., Hansbo, P., Larson, M., Larsson, K. (2018). Shape optimization using the cut finite element method. Computer Methods in Applied Mechanics and Engineering (pp. 242-261).
• Burman, E., Hansbo, P. (2018). Stabilized nonconforming finite element methods for data assimilation in incompressible flows. Mathematics of Computation 87(311), 1029-1050
• Burman, E., Hansbo, P., Larson, M. (2018). A cut finite element method with boundary value correction. Mathematics of Computation 87(310), 633-657
• Burman, E., Hansbo, P., Larson, M. (2018). Augmented Lagrangian and Galerkin least-squares methods for membrane contact. International Journal for Numerical Methods in Engineering 114(11), 1179-1191
• Burman, E., Hansbo, P., Larson, M. (2018). A simple approach for finite element simulation of reinforced plates. Finite elements in analysis and design (Print) (pp. 51-60).
• Burman, E., Hansbo, P., Larson, M. (2018). Solving ill-posed control problems by stabilized finite element methods: an alternative to Tikhonov regularization. Inverse Problems 34(3),
• Ceschini, L., Morri, A., Toschi, S., Bjurenstedt, A., Seifeddine, S. (2018). Influence of sludge particles on the fatigue behavior of Al-Si-Cu secondary aluminium casting alloys. Metals 8(4),
• Dini, H., Andersson, N., Jarfors, A. (2018). Effect of process parameters on distortion and residual stress of high-pressure die-cast AZ91D components. International Journal of metalcasting 12(3), 487-497
• Dini, H., Svoboda, A., Andersson, N., Ghassemali, E., Lindgren, L., Jarfors, A. (2018). Optimization and validation of a dislocation density based constitutive model for as-cast Mg-9%Al-1%Zn. Materials Science & Engineering (pp. 17-26).
• Domeij, B., Diószegi, A. (2018). Solidification Chronology of the Metal Matrix and a Study of Conditions for Micropore Formation in Cast Irons Using EPMA and FTA. Materials Science Forum (pp. 436-443).
• Domeij, B., Hernando, J., Diószegi, A. (2018). Size distribution of graphite nodules in hypereutectic cast irons of varying nodularity. Metallurgical and materials transactions. B, process metallurgy and materials processing science 49(5), 2487-2504
• Fourlakidis, V., Belov, I., Diószegi, A. (2018). Strength prediction for pearlitic lamellar graphite iron: Model validation. Metals 8(9),
• Fourlakidis, V., Diaconu, L., Diószegi, A. (2018). Strength prediction of lamellar graphite iron: From Griffith’s to hall-petch modified equation. Materials Science Forum (pp. 272-279).
• Ghasemi, R., Elmquist, L., Ghassemali, E., Salomonsson, K., Jarfors, A. (2018). Abrasion resistance of lamellar graphite iron: Interaction between microstructure and abrasive particles. Tribology International (pp. 465-475).
• Ghasemi, R., Jarfors, A. (2018). Scratch behaviour of silicon solid solution strengthened ferritic compacted graphite iron (CGI). Materials Science Forum (pp. 318-325).
• Ghassemali, E., Jarfors, A., Diószegi, A. (2018). On the Formation of Micro-Shrinkage Porosities in Ductile Iron Cast Components. 8(7),
• Ghassemali, E., Sonkusare, R., Biswas, K., Gurao, N. (2018). Dynamic precipitation at elevated temperatures in a dual-phase AlCoCrFeNi high-entropy alloy: an in situ study. Philosophical Magazine Letters 98(9), 400-409
• Hajiannia, I., Shamanian, M., Atapour, M., Ghassemali, E., Saeidi, N. (2018). Development of Ultrahigh Strength TRIP Steel Containing High Volume Fraction of Martensite and Study of the Microstructure and Tensile Behavior. Transactions of the Indian Institute of Metals 71(6), 1360-1367
• Hajiannia, I., Shamanian, M., Atapour, M., Ghassemali, E., Ashiri, R. (2018). A microstructure evaluation of different areas of resistance spot welding on ultra-high strength TRIP1100 steel. 5(1),
• Hellström, K., Svidró, P., Diaconu, L., Diószegi, A. (2018). Density variations during solidification of grey cast Iron. Materials Science Forum (pp. 155-162).
• Hernando, J., Diószegi, A. (2018). On the primary solidification of compacted graphite iron: Microstructure evolution during isothermal coarsening. Materials Science Forum (pp. 90-97).
• Jansson, J., Gustafsson, T., Salomonsson, K., Olofsson, J., Johansson, J., Appelsved, P., Palm, M. (2018). An anisotropic non-linear material model for glass fibre reinforced plastics. Composite structures (pp. 93-98).
• Kasvayee, K., Ciavatta, M., Ghassemali, E., Svensson, I., Jarfors, A. (2018). Effect of Boron and Cross-Section Thickness on Microstructure and Mechanical Properties of Ductile Iron. Materials Science Forum (pp. 249-256).
• Kasvayee, K., Ghassemali, E., Salomonsson, K., Sujakhu, S., Castagne, S., Jarfors, A. (2018). Microstructural strain mapping during in-situ cyclic testing of ductile iron. Materials Characterization (pp. 333-339).
• Leisner, P., Zanella, C. (2018). Application of Assaf panel for evaluating throwing power of pulse reverse electroplating on complex geometries. Transactions of the Institute of Metal Finishing 96(5), 258-264
• Lidumnieks, K., Svidró, J., Diószegi, A. (2018). The effect of various production parameters on the heat absorbing capacity of greensand. International Journal of Cast Metals Research 31(1), 7-13
• Malakizadi, A., Ghasemi, R., Behring, C., Olofsson, J., Jarfors, A., Nyborg, L., Krajnik, P. (2018). Effects of workpiece microstructure, mechanical properties and machining conditions on tool wear when milling compacted graphite iron. Wear (pp. 190-201).
• Maryam, E., Payandeh, M., Deflorian, F., Jarfors, A., Zanella, C. (2018). Effect of Segregation and Surface Condition on Corrosion of Rheo-HPDC Al–Si Alloys. Metals 8(4),
• Matsushita, T., Saro, A., Elmquist, L., Jarfors, A. (2018). On the thermal conductivity of CGI and SGI cast irons. International Journal of Cast Metals Research 31(3), 135-143
• Nielsen, L., Leisner, P., Møller, P. (2018). Surface technology is essential for transition to a hydrogen-based energy system. Transactions of the Institute of Metal Finishing 96(1), 8-10
• Olofsson, J. (2018). Local microstructure-based material performance and damage in design and finite element simulations of cast components. 5(4), 419-426
• Olofsson, J., Cenni, R., Cova, M., Bertuzzi, G., Salomonsson, K., Johansson, J. (2018). Multidisciplinary shape optimization of ductile iron castings by considering local microstructure and material behaviour. Structural and multidisciplinary optimization (Print) 57(5), 1889-1903
• Raza, M., Silva, P., Irwin, M., Fagerström, B., Jarfors, A. (2018). Effects of process related variations on defect formation in investment cast components. Archives of Foundry Engineering 18(1), 103-108
• Raza, M., Svenningsson, R., Irwin, M., Fägerström, B., Jarfors, A. (2018). Effects of process related variations on fillablity simulation of thin-walled IN718 structures. International Journal of metalcasting 12(3), 543-553
• Riestra, M., Bjurenstedt, A., Bogdanoff, T., Ghassemali, E. (2018). Complexities in the assessment of melt quality. International Journal of metalcasting 12(3), 441-448
• Salomonsson, K., Jarfors, A. (2018). Three-dimensional microstructural characterization of cast iron alloys for numerical analyses. Materials Science Forum (pp. 427-435).
• Santos, J., Kallien, L., Jarfors, A., Dahle, A. (2018). Influence of grain refinement on slurry formation and surface segregation in semi-solid Al-7Si-0.3Mg castings. Metallurgical and Materials Transactions. A 49A(10), 4871-4883
• Siafakas, D., Matsushita, T., Hakamada, S., Onodera, K., Kargl, F., Jarfors, A., Watanabe, M. (2018). Measurement of Viscosity of SiO2-CaO-Al2O3 Slag in Wide Temperature Range by Aerodynamic Levitation and Rotating Bob Methods and Sources of Systematic Error. 35(2),
• Siafakas, D., Matsushita, T., Jarfors, A., Hakamada, S., Watanabe, M. (2018). Viscosity of SiO2–CaO–Al2O3 slag with low silica – Influence of CaO/Al2O3, SiO2/Al2O3 ratio. ISIJ International 58(12), 2180-2185
• Siafakas, D., Matsushita, T., Lauenstein, Å., Ekerot, S., Jarfors, A. (2018). A particle population analysis in Ti- and Al-deoxidized Hadfield steels. International Journal of Cast Metals Research 31(3), 125-134
• Skoglund, P., Elfsberg, J., Ipek, N., Diaconu, L., Larsson, M., Schmidt, P. (2018). Thermo-mechanical fatigue of grey cast iron for cylinder heads - Effect of niobium, molybdenum and solidification time. Materials Science Forum (pp. 377-384).
• Sujakhu, S., Castagne, S., Sakaguchi, M., Kasvayee, K., Ghassemali, E., Jarfors, A., Wang, W. (2018). On the fatigue damage micromechanisms in Si-solution-strengthened spheroidal graphite cast iron. Fatigue & Fracture of Engineering Materials & Structures 41(3), 625-641
• Svensson, I., Salomonsson, K. (2018). Mathematical characterization of the tensile deformation curve of cast iron materials. Materials Science Forum (pp. 444-450).
• Svidró, J., Diószegi, A. (2018). New possibilities in thermal analysis of molding materials. Journal of Casting & Materials Engineering 2(4), 67-70
• Svidró, J., Diószegi, A. (2018). Novel Measurement Method to Study Thermal Aspects of Molding Mixture Decomposition. Journal of Casting & Materials Engineering 2(3), 63-66
• Svidró, P., Diószegi, A., Jönsson, P. (2018). Extended method of volume change measurements during solidification of lamellar graphite iron. Materials Science Forum (pp. 163-170).
• Svidró, P., Diószegi, A., Jönsson, P., Stefanescu, D. (2018). Determination of pressure in the extradendritic liquid area during solidification. Journal of thermal analysis and calorimetry (Print) 132(3), 1661-1667
• Thomser, C., Olofsson, J., Gurevitch, V. (2018). Influence of local microstructure on stresses, durability and fracture mechanics of cast iron components. Materials Science Forum (pp. 264-271).
• Wójcik, N., Jonson, B., Möncke, D., Palles, D., Kamitsos, E., Ghassemali, E. ... Ali, S. (2018). Influence of synthesis conditions on glass formation, structure and thermal properties in the Na2O-CaO-P2O5 system doped with Si3N4 and Mg. Journal of Non-Crystalline Solids (pp. 66-77).
• Ali, S., Bogdanoff, T., Seifeddine, S., Jonson, B. (2017). Hardness, elastic modulus and refractive index of oxynitride glasses prepared from woody biofuel ashes. 58(6), 231-236
• Awe, S., Seifeddine, S., Jarfors, A., Lee, Y., Dahle, A. (2017). Development of new Al-Cu-Si alloys for high temperature performance. Advanced Materials Letters 8(6), 695-701
• Bjurenstedt, A., Casari, D., Seifeddine, S., Mathiesen, R., Dahle, A. (2017). In-situ study of morphology and growth of primary α-Al(FeMnCr)Si intermetallics in an Al-Si alloy. Acta Materialia (pp. 1-9).
• Eslami, M., Fedel, M., Speranza, G., Deflorian, F., Andersson, N., Zanella, C. (2017). Study of selective deposition mechanism of cerium-based conversion coating on Rheo-HPDC aluminium-silicon alloys. Electrochimica Acta (pp. 449-462).
• Eslami, M., Fedel, M., Speranza, G., Deflorian, F., Zanella, C. (2017). Deposition and Characterization of Cerium-Based Conversion Coating on HPDC Low Si Content Aluminum Alloy. Journal of the Electrochemical Society 164(9), C581-C590
• Ghasemi, R., Olofsson, J., Jarfors, A., Svensson, I. (2017). Modelling and simulation of local mechanical properties of high silicon solution-strengthened ferritic compacted graphite iron. International Journal of Cast Metals Research 30(3), 125-132
• Ghassemali, E., Sonkusare, R., Biswas, K., Gurao, N. (2017). In-situ study of crack initiation and propagation in a dual phase AlCoCrFeNi high entropy alloy. Journal of Alloys and Compounds (pp. 539-546).
• Ghatei Kalashami, A., Kermanpur, A., Ghassemali, E., Najafizadeh, A., Mazaheri, Y. (2017). The effect of Nb on texture evolutions of the ultrafine-grained dual-phase steels fabricated by cold rolling and intercritical annealing. Journal of Alloys and Compounds (pp. 1026-1035).
• Hellström, K., Diószegi, A., Diaconu, L. (2017). A broad literature review of density measurements of liquid cast iron. MDPI
• Hernando, J., Domeij, B., González, D., Amieva, J., Diószegi, A. (2017). New experimental technique for nodularity and Mg fading control in compacted graphite iron production on laboratory scale. Metallurgical and Materials Transactions. A 48(11), 5432-5441
• Hernando, J., Ghassemali, E., Diószegi, A. (2017). The morphological evolution of primary austenite during isothermal coarsening. Materials Characterization (pp. 492-499).
• Jarfors, A., Castagne, S., Danno, A., Zhang, X. (2017). Tool wear and life span variations in cold forming operations and their implications in microforming. MDPI
• Kasvayee, K., Ghassemali, E., Salomonsson, K., Sujakhu, S., Castagne, S., Jarfors, A. (2017). Strain localization and crack formation effects on stress-strain response of ductile iron. Materials Science & Engineering (pp. 265-271).
• Kasvayee, K., Ghassemali, E., Svensson, I., Olofsson, J., Jarfors, A. (2017). Characterization and modeling of the mechanical behavior of high silicon ductile iron. Materials Science & Engineering (pp. 159-170).
• Leisner, P., Zanella, C., Belov, I., Edström, C., Sandulache, G., Hansal, W. (2017). Control of silver throwing power by pulse reverse electroplating. Transactions of the Institute of Metal Finishing 95(1), 25-30
• Matsushita, T., Saro, A., Elmquist, L., Jarfors, A. (2017). On the specific heat and thermal diffusivity of CGI and SGI cast irons. International Journal of Cast Metals Research 30(5), 276-282
• Olofsson, J., Salomonsson, K., Johansson, J., Amouzgar, K. (2017). A methodology for microstructure-based structural optimization of cast and injection moulded parts using knowledge-based design automation. Advances in Engineering Software (pp. 44-52).
• Payandeh, M., Sabzevar, M., Jarfors, A., Wessén, M. (2017). Solidification and re-melting phenomena during slurry preparation using the RheoMetal™ process. Metallurgical and materials transactions. B, process metallurgy and materials processing science 48(6),
• Riestra, M., Ghassemali, E., Bogdanoff, T., Seifeddine, S. (2017). Interactive effects of grain refinement, eutectic modification and solidification rate on tensile properties of Al-10Si alloy. Journal of materials processing & manufacturing science (Print) (pp. 270-279).
• Siafakas, D., Matsushita, T., Lauenstein, Å., Jarfors, A., Ekengård, J. (2017). The Influence of Deoxidation Practice on the As-Cast Grain Size of Austenitic Manganese Steels. Metals 7(6),
• Silva, F., Santos, J., Gouveia, R. (2017). Dissolution of grain boundary carbides by the effect of solution annealing heat treatment and aging treatment on heat-resistant cast steel HK30. Metals 7(7),
• Svidró, J., Diószegi, A., Tóth, L., Svidró, J. (2017). The influence of thermal expansion of unbonded foundry sands on the deformation of resin bonded cores. Archives of Metallurgy and Materials 62(2), 795-798
• Svidró, J., Diószegi, A., Svidró, J., Ferenczi, T. (2017). Thermophysical aspects of reclaimed moulding sand addition to the epoxy-SO2 coremaking system studied by Fourier thermal analysis. Journal of thermal analysis and calorimetry (Print) 130(3), 1779-1789
• Svidró, J., Diószegi, A., Svidró, J., Ferenczi, T. (2017). The effect of different binder levels on the heat absorption capacity of moulding mixtures made by the phenolic urethane cold-box process. Journal of thermal analysis and calorimetry (Print) 130(3), 1769-1777
• Svidró, P., Diószegi, A., Pour, M., Jönsson, P. (2017). Investigation of dendrite coarsening in complex shaped lamellar graphite iron castings. Metals 7(7),
• Wikedzi, A., Awe, S. (2017). Selective Extraction of Antimony and Arsenic from Decopperization Slime Using Experimental Design. Journal of sustainable metallurgy 3(2), 362-374
• Zamani, M., Dini, H., Svoboda, A., Lindgren, L., Seifeddine, S., Andersson, N., Jarfors, A. (2017). A dislocation density based constitutive model for as-cast Al-Si alloys: Effect of temperature and microstructure. International Journal of Mechanical Sciences (pp. 164-170).
• Zhang, Y., Hammam, T., Belov, I., Sjögren, T., Bakowski, M., Nee, H. (2017). Thermomechanical Analysis and Characterization of a Press-Pack Structure for SiC Power Module Packaging Applications. IEEE Transactions on Components, Packaging, and Manufacturing Technology 7(7), 1089-1100
• Zhu, B., Fedel, M., Andersson, N., Leisner, P., Deflorian, F., Zanella, C. (2017). Effect of Si content and morphology on corrosion resistance of anodized cast Al-Si alloys. Journal of the Electrochemical Society 164(7), C435-C441
• Belov, I., Zanella, C., Edström, C., Leisner, P. (2016). Finite element modeling of silver electrodeposition for evaluation of thickness distribution on complex geometries. Materials & design (pp. 693-703).
• Bjurenstedt, A., Seifeddine, S., Jarfors, A. (2016). The effects of Fe-particles on the tensile properties of Al-Si-Cu alloys. Metals 6(12),
• Bogdanoff, T., Seifeddine, S., Dahle, A. (2016). The effect of SI content on microstructure and mechanical properties of Al-Si alloy. La Metallurgia Italiana 108(6),
• Ceschini, L., Morri, A., Toschi, S., Seifeddine, S. (2016). Room and high temperature fatigue behaviour of the A354 and C355 (Al-Si-Cu-Mg) alloys: Role of microstructure and heat treatment. Materials Science & Engineering (pp. 129-138).
• Ceschini, L., Morri, A., Toschi, S., Boromei, I., Bjurenstedt, A., Seifeddine, S. (2016). Al-Si-Cu alloys for high pressure die casting: Influence of Fe, Mn, and Cr on room temperaturemechanical properties. La Metallurgia Italiana (pp. 77-80).
• Dini, H., Andersson, N., Jarfors, A. (2016). Effect of Mg₁₇Al₁₂ Fraction on Mechanical Properties of Mg-9%Al-1%Zn Cast Alloy. Metals 6(10),
• Diószegi, A., Diószegi, E., Tóth, J., Svidró, J. (2016). Modelling and simulation of heat conduction in 1-D polar spherical coordinates using control volume-based finite difference method. International journal of numerical methods for heat & fluid flow 26(1), 2-17
• Diószegi, A., Fourlakidis, V., Diaconu, L. (2016). Prediction of volume fraction of primary austenite at solidification of lamellar graphite cast iron using thermal analyses. Journal of thermal analysis and calorimetry (Print) 124(1), 215-225
• Diószegi, A., Svidró, P., Elmquist, L., Dugic, I. (2016). Defect formation mechanisms in lamellar graphite iron related to the casting geometry. International Journal of Cast Metals Research 29(5), 279-285
• Domeij, B., Hernando, J., Diószegi, A. (2016). Quantification of dendritic austenite after interrupted solidification in a hypoeutectic lamellar graphite iron. 5(1), 28-42
• Ekengård, J., Diószegi, A., Jönsson, P. (2016). A study of oxygen activities before the start of solidification of cast iron. International Journal of metalcasting 10(4), 500-515
• Esmaily, M., Mortazavi, N., Svensson, J., Halvarsson, M., Jarfors, A., Wessén, M. ... Johansson, L. (2016). On the microstructure and corrosion behavior of AZ91/SiC composites produced by rheocasting. Materials Chemistry and Physics (pp. 29-37).
• Esmaily, M., Mortazavi, N., Svensson, J., Halvarsson, M., Wessén, M., Johansson, L., Jarfors, A. (2016). A new semi-solid casting technique for fabricating SiC-reinforced Mg alloys matrix composites. Composites Part B (pp. 176-189).
• Ghasemi, R., Elmquist, L., Svensson, H., König, M., Jarfors, A. (2016). Mechanical properties of solid solution-strengthened CGI. International Journal of Cast Metals Research 29(1-2), 98-105
• Ghatei Kalashami, A., Kermanpur, A., Ghassemali, E., Najafizadeh, A., Mazaheri, Y. (2016). Correlation of microstructure and strain hardening behavior in the ultrafine-grained Nb-bearing dual phase steels. Materials Science & Engineering (pp. 215-226).
• Jarfors, A. (2016). Yielding and failure of hot chamber die cast thin-walled AZ91D. Metallurgia Italiana 108(6), 53-56
• Kasvayee, K., Salomonsson, K., Ghassemali, E., Jarfors, A. (2016). Microstructural strain distribution in ductile iron: Comparison between finite element simulation and digital image correlation measurements. Materials Science & Engineering (pp. 27-35).
• Payandeh, M., Belov, I., Jarfors, A., Wessén, M. (2016). Effect of Material Inhomogeneity on Thermal Performance of a Rheocast Aluminum Heatsink for Electronics Cooling. Journal of materials engineering and performance (Print) 25(6), 2116-2127
• Payandeh, M., Jarfors, A., Wessén, M. (2016). Solidification sequence and evolution of microstructure during rheocasting of four Al-Si-Mg-Fe alloys with Low Si content. Metallurgical and Materials Transactions. A 47(3), 1215-1228
• Payandeh, M., Jarfors, A., Wessén, M. (2016). The effect of microstructural inhomogeneity on thermal diffusivity in a rheocast component. La Metallurgia Italiana 108(6), 57-60
• Payandeh, M., Sjölander, E., Jarfors, A., Wessén, M. (2016). Influence of microstructure and heat treatment on thermal conductivity of rheocast and liquid die cast Al-6Si-2Cu-Zn alloy. International Journal of Cast Metals Research 29(4), 202-213
• Rastegari, H., Kermanpur, A., Najafizadeh, A., Somani, M., Porter, D., Ghassemali, E., Jarfors, A. (2016). Determination of processing maps for the warm working of vanadium microalloyed eutectoid steels. Materials Science and Engineering: A (pp. 167-175).
• Riestra, M., Seifeddine, S., Sjölander, E. (2016). Tailoring Al-7Si-0.3Mg cast alloy properties to represent HPDC tensile and fatigue behaviour in component prototypes. La Metallurgia Italiana 108(6), 33-36
• Santos, J., Jarfors, A., Dahle, A. (2016). Filling, Feeding and Defect Formation of Thick-Walled AlSi7Mg0.3 Semi-Solid Castings. Solid State Phenomena (pp. 222-227).
• Siafakas, D., Matsushita, T., Jarfors, A., Lauenstein, Å., Ekerot, S. (2016). Particles precipitation in Ti and Al deoxidized Hadfield steels. Steel Research International 87(10), 1344-1355
• Tóth, J., Svidró, J., Diószegi, A., Stevenson, D. (2016). Heat absorption capacity and binder degradation characteristics of 3D printed cores investigated by inverse fourier thermal analysis. International Journal of metalcasting 10(3), 306-314
• Wikedzi, A., Sandström, Å., Awe, S. (2016). Recovery of antimony compounds from alkaline sulphide leachates. International Journal of Mineral Processing (pp. 26-35).
• Wilberfors, F., Svensson, I., Elfsberg, J., Richnau, K., Ipek, N. (2016). Local chill as a mean of increasing strength in grey cast iron. International Journal of Cast Metals Research 29(1-2), 40-46
• Zamani, M., Amadeh, A., Lari Baghal, S. (2016). Effect of Co content on electrodeposition mechanism and mechanical properties of electrodeposited Ni-Co alloy. Transactions of Nonferrous Metals Society of China 26(2), 484-491
• Zamani, M., Seifeddine, S. (2016). Determination of Optimum Sr Level for Eutectic Si Modification in Al–Si Cast Alloys Using Thermal analysis and Tensile Properties. International Journal of metalcasting 10(4), 457-465
• Zamani, M., Seifeddine, S., Ghassemali, E. (2016). Effect of cooling rate and eutectic modification on texture and grain structure of Al-Si-Cu-Mg die cast alloy. La Metallurgia Italiana 108(6), 5-8
• Zanella, C., Péter, L., Leisner, P. (2016). Promotion of young European scientists in surface technology. Transactions of the Institute of Metal Finishing 94(4), 173-174
• Zhu, B., Leisner, P., Seifeddine, S., Jarfors, A. (2016). Influence of Si and cooling rate on microstructure and mechanical properties of Al–Si–Mg cast alloys. Surface and Interface Analysis 48(8), 861-869
• Zhu, B., Seifeddine, S., Persson, P., Jarfors, A., Leisner, P., Zanella, C. (2016). A study of formation and growth of the anodised surface layer on cast Al-Si alloys based on different analytical techniques. Materials & design (pp. 254-262).
• Bjurenstedt, A., Seifeddine, S., Jarfors, A. (2015). On the complexity of the relationship between microstructure and tensile properties in cast aluminum. International Journal of Modern Physics B 29(10-11),
• Borkar, H., Seifeddine, S., Jarfors, A. (2015). In-situ EBSD study of deformation behavior of Al-Si-Cu alloys during tensile testing. Materials & design (pp. 36-47).
• Borkar, H., Seifeddine, S., Jarfors, A. (2015). Microstructure analysis of Al-Si-Cu alloys prepared by gradient solidification technique. International Journal of Modern Physics B 29(10-11),
• Ceschini, L., Morri, A., Toschi, S., Johansson, S., Seifeddine, S. (2015). Microstructural and mechanical properties characterization of heat treated and overaged cast A354 alloy with various SDAS at room and elevated temperature. Materials Science & Engineering (pp. 340-349).
• Ceschini, L., Morri, A., Toschi, S., Seifeddine, S., Johansson, S. (2015). Effect of microstructure and overaging on the tensile behaviour at room and elevated temperature of C355-T6 cast aluminum alloy. Materials & design (pp. 626-634).
• Diószegi, A., Fourlakidis, V., Lora, R. (2015). Austenite dendrite morphology in lamellar graphite iron. International Journal of Cast Metals Research 28(5), 310-317
• Esmaily, M., Mortazavi, S., Svensson, J., Halvarsson, M., Blücher, D., Jarfors, A. ... Johansson, L. (2015). Atmospheric Corrosion of Mg Alloy AZ91D Fabricated by aSemi-Solid Casting Technique: The Influence of Microstructure. Journal of the Electrochemical Society 162(7), C311-C321
• Esmaily, M., Mortazavi, S., Shahabi-Navid, M., Svensson, J., Halvarsson, M., Nyborg, L. ... Johansson, L. (2015). Effect of Rheocasting on Corrosion of AM50 Mg Alloy. Journal of the Electrochemical Society 162(3), C85-C95
• Ferraro, S., Bjurenstedt, A., Seifeddine, S. (2015). On the formation of sludge intermetallic particles in secondary aluminum alloys. Metallurgical and Materials Transactions. A 46(8), 3713-3722
• Ghassemali, E., Tan, M., Wahb, C., Lim, S., Jarfors, A. (2015). Effect of cold-work on the Hall–Petch breakdown in copper based micro-components. Mechanics of materials (pp. 124-135).
• Jarfors, A., Rigovacca, D., Payandeh, M., Wessén, M., Seifeddine, S., Jansson, P. (2015). Influence of process parameters on surface appearance and roughness of a low Si containing Al-alloy, in semisolid casting. Solid State Phenomena (pp. 318-324).
• Matsushita, T., Ghassemali, E., Saro, A., Elmquist, L., Jarfors, A. (2015). On Thermal Expansion and Density of CGI and SGI Cast Irons. Metals 5(2), 1000-1019
• Orlenius, J., Gotthardsson, U., Diószegi, A. (2015). Mould and core gas evolution in grey iron castings. International Foundry Research 67(4), 10-20
• Payandeh, M., Jarfors, A., Wessén, M. (2015). Influence of Microstructural Inhomogeneity on Fracture Behaviour in SSM-HPDC Al-Si-Cu-Fe Component with Low Si Content. Solid State Phenomena (pp. 67-74).
• Rossi, S., Parziani, N., Zanella, C. (2015). Abrasion resistance of vitreous enamel coatings in function of frit composition and particles presence. Wear (pp. 702-709).
• Sjölander, E., Seifeddine, S., Fracasso, F. (2015). Influence of Quench Rate on the Artificial Ageing Response of an Al-8Si-0.4Mg Cast Alloy. Materials Science Forum (pp. 219-225).
• Vazehrad, S., Elfsberg, J., Diószegi, A. (2015). Study of microstructure and silicon segregation in cast iron using color etching and electron microprobe analysis. Materials Characterization (pp. 132-138).
• Zamani, M., Seifeddine, S., Jarfors, A. (2015). High Temperature Tensile Deformation Behaviour and Failure Process of an Al-Si-Cu-Mg Cast Alloy: The Microstructural Scale Effect. Materials & design (pp. 361-370).
• Zsolt, T., Zhang, Y., Belov, I., Nee, H., Bakowski, M. (2015). Investigation of Pressure Dependent Thermal Contact Resistance between Silver Metallized SiC Chip and DBC Substrate. Materials Science Forum (pp. 452-455).